Smooth Fitness 5.65S - Manual (Page 15)

www.smoothfitness.com 15
ASSEMBLY – PLEASE READ ALL STEPS BEFORE BEGINNING YOUR WORK.
STEP1: Assemble Console Mast to Base Frame.
NOTE: Make sure all wires are recessed into the frame. DO NOT trap or
pinch. DO NOT tighten any bolts until STEP2.
When attaching the Right upright (310) first attach the Lower Console Wire to the
fish wire in the upright. This will allow you to pull the data cable up through the
upright during installation
1). Attach Left and Right Uprights into base frame, and secure using the 6 x
M8x15mm Bolt (303) with 4 x M8 Curve Washer (304), 2 x M8 Washer (305).
303 X6
305 X2
304 X4
Bolts should be hand tight only
Green plastic wrap
Clear plastic wrap
303
305
303
304
151
Caution Wire
Pinch Point