SmartDisk Firewire CD-R/W - Manual (Page 15)

Macintosh Users
15 SmartDisk FireWire CD-R/W User Guide
Macintosh Users
To connect SmartDisk FireWire CD-R/W to your Macintosh:
1 Connect one end of the FireWire cable to an open FireWire port on your
Macintosh.
2 Connect the other end of the cable to either one of the FireWire ports on the
SmartDisk FireWire CD-R/W.
Disconnecting SmartDisk FireWire CD-R/W from your Macintosh
Do not disconnect SmartDisk FireWire Portable CD-R/W while it is active (when
the yellow light is flashing); your data may be lost or SmartDisk FireWire Porta-
ble CD-R/W may be damaged. If there is no CD inside the drive, simply unplug
the drive. If a CD is inside the drive, drag the CD icon to the trash to eject and
remove the CD. Then unplug the drive.
Caution
Do not force the connection as damage may occur to the connector
or the FireWire port.
Tip
You can also safely unplug SmartDisk FireWire CD-R/W by shutting
down the computer. Remember to ensure the yellow light is off
before disconnecting.