SmartDisk Firewire CD-R/W User Manual
Page 25
Overview
25
SmartDisk FireWire CD-R/W User Guide
My CDs are not recorded properly.
A.
Ensure the recording software has been
installed correctly as described in Chapter 2.
Reinstall the software if required.
B.
The stream of data may have been
interrupted during the recording process. To
prevent this from happening, disable other
active software programs during the CD
recording process. For more information,
see See “CD Recording Tips” on page 22.
C.
Your hard drive may not be fast enough. Or,
if you are recording from a CD-ROM or DVD-
ROM, ensure it operates at a high enough
speed. This is required to provide a sufficient
data stream to the CD-RW drive. A simple
solution is to reduce the Write Speed. This
can be done in the Recording software
options.
D.
The CD-R/ CD-RW disk may be bad or
scratched. Try using a new CD-R or CD-RW
disk.