Samsung SHR-6040 - Manual (Page 30)

26_ menu setup
System Information & Setup
 mac Address
Displays the unique number of the network hardware
device attached to the system.
 Software Version
Displays the current software version.
 Package Search
After connecting the USB device (holding the DVR
software) to a USB port, press the ( ) icon and the
DVR software will be automatically searched. If the
DVR software does not exist in the USB device, the
upgrade version will not be displayed.
 Upgrade Version
The software version to be upgraded will be shown. If
you press the “ Upgrade”, the restart message window
appears. You can select “ Yes” to proceed with the
upgrade.
 Remocon ID
In order to control the DVR with a remote commander,
set the DVR and the remocon ID.
 micro Version
This menu indicates firm wear version of
Microprocessor
Caution
 For the DVR to recognize the update file
the file should be inserted into a folder
named “update”. So this folder should
be created on a USB memory and then
the upgrade file copied inside the folder.
 When upgrading the software, you must
neither turn off the power nor remove
the USB device. The system may run
abnormally.
 When using a USB memory, please
use the USB device that can support
Linux 2.6.0 or higher. The system
cannot support the device that does not
support Linux.
 The file system for the USB device must
be either FAT16 or FAT32. The system
does not support NTFS or other file
systems.
 Since some USB devices either have no
power supply or have a low voltage, a
separate power supply may be needed
to recognize them.
 When shipping this product, the remote
controller ID is set to ‘ 00’.
 When changing the remote control ID, press
“ Remocon ID” and enter the DVR ID.
HDD Setup
 HDD Info
Shows the installed HDD information and the capacity.
System Information/Setup
OK Cancel
mac Address
Software Version
Package Search
Upgrade Version
Remocon ID
micro Version
00:C:8C:ff:00:A9
V1.000A10
find package in USB
None
00
V1.0.0
move/Control Select Exit
Upgrade
HDD Setup
OK Cancel format
ATA
1
2
HDD END
Recording
Info format
SATA2 160 GB / 232 GB
Overwrite
Off
Setup
SHR-6042_Eng.indb 26 2009-06-05 오전 11:23:38