Motion detection setup, Video loss detection setup – Samsung SHR-6040 User Manual
Page 37
05
m
en
u
s
et
u
p
menu setup _
33
Motion Detection Setup
Set the motion detection area, sensitivity and alarm for
each camera video.
Press the
enter(
) button after moving the cursor on
the camera to be set.
Alarm Out
It sets the alarm output when a motion is detected.
Currently the system supports 2 Alarm Out functions
and 1 built-in speaker output.
Duration
Sets the duration for Alarm Out. The alarm sound is
sustained for the preset period.
COntInue: The alarm output sound will be
maintained until it is cancelled by pressing the
ALARm
button manually on the front panel.
10~300 seconds: Sets the duration for alarm output.
sensitivity
It relates to configuration for motion detection and
sensitivity.
The sensitivity can be set to Very High, High, Medium,
Low or Very Low.
Area set
If you press the
enter(
) button after moving the
cursor to the video display area on the right, the motion
area can be set/cancelled.
(
): Sets the whole part as the motion area.
(
): Cancels the whole motion area.
If you press “
Default”, the motion setup is reset to the
initial values.
Video Loss Detection Setup
If a video loss occurs from each channel, it can be set to
generate an alarm output sound.
Alarm Out
Sets an alarm-out method when an event has
occurred from the Alarm In.
Currently, this system supports 2 Alarm Out functions
and 1 built-in speaker (beep) output.
The following screen appears when you press the
enter(
) button after moving the cursor to the Alarm
Out item.
Duration
Sets the duration for Alarm Out. The alarm sound is
sustained for the preset period.
COntInue: The alarm output sound is maintained
until it is cancelled by pressing the
ALARm button
manually on the front panel.
10~300 seconds: Sets the duration for alarm output.
All
OK
Cancel
Beep
2
1
Motion Detection Setup
OK
Cancel
Alarm-Out
Duration
Sensitivity
Area Set
None
High
Default
Video Loss Detection Setup
Alarm-Out
None
None
None
None
10 SEC
10 SEC
10 SEC
10 SEC
Duration
OK
Cancel
Move/Control
Select
Exit
SHR-6042_Eng_02.indd 33
2009-06-11 오전 8:49:25