Samsung SHR-6040 - Manual (Page 62)

58_ appendix
motion Detection Settings
Motion detection is a feature capable of starting
recording, sounding an alarm, and transmitting an
emergency message upon detection of motion by an
activated camera.
1. Camera:
Select the camera channel you wish to configure.
2. motion Detection Zone:
Used to define a camera’s motion detection zone.
The motion detection zone is indicated by green
blocks.
Designating motion Detection Zone:
Left-click on the mouse and drag to designate the
motion detection zone.
Deactivating motion Detection Zone:
Right-click on the mouse and drag to deactivate the
motion detection zone.
3. Alarm:
Used to select an alarm to link to motion detection-
activated cameras. When motion is detected by any
one of the activated cameras, alarm will sound by the
designated alarm(s).
4. Duration:
Used to configure the event-triggered alarm duration.
5. Sensitivity:
Used to designate the level of motion detection
sensitivity.
Video Loss Detection Settings
This feature sounds an alarm when video loss is detected
from a camera.
1. Camera:
Select the camera channel you wish to configure.
2. Alarm:
Select the alarm(s) you wish to trigger when video
loss is detected. When video loss is detected by any
one of the activated cameras, alarm will sound by the
designated alarm(s).
3. Duration:
Used to configure the event-triggered alarm duration.
3
2
4
5
1
2
1 3
SHR-6042_Eng.indb 58 2009-06-05 오전 11:23:52