Sim2 Multimedia HT 250 - Manual (Page 20)

HT 200/250
22
13.3.3 PROJECTION LENS
To adjust Focus and Size of the projected image, use
the lens settings.
Alternatively, press keys Focus and Zoom
on your
remote control. Or by pressing three times the key -
Focus-Esc on keyboard pad.
Setup
Focus
Zoom
Projection lens
FOCUS
FOCUS
FOCUS
FOCUS
ZOOM
ZOOM
ZOOM
ZOOM
ZOOM
13.3.4 TEST PATTERNS
Displays a series of five test patterns, useful for the
installation of the projector.
Press UP and DOWN arrow key to browse pattern.
13.3.5 FACTORY DEFAULTS
Reconfigures the projector to original factory settings:
Front Projection with 0% keystone and normal format.
Setup
Factory Defaults
Press V+ to reset all settings
to the factory default values.
13.4 MENU
This menu covers the On Screen Display adjustments.
Menu
Language
OSD Position
OSD Background
OSD Timeout
Clear Solid
20s
13.4.1 LANGUAGE
Lists the languages options available for the On Screen
Display menus.
Menu
Language
13.4.2 OSD POSITION
To position the On Screen Display within the picture area,
by using the arrow keys.
13.4.3 OSD BACKGROUND
Gives a choice of backgrounds for the On Screen
Display.
13.4.4 OSD TIMEOUT
Use this adjustment to set the display time after which
the On Screen Display will disappear.
LEFT and RIGHT arrow keys set the timing (within a 5-50
second timeframe).