Stamina Products Fusion 7100 - Manual (Page 12)

ASSEMBLY INSTRUCTIONS
12
STEP 11
Refer to the inset drawing. Run the CONNECTION WIRE(25) through the hole in the plate on the
HANDLEBAR(4). Attach the HANDLEBAR(4) to the UPRIGHT(3) with BUTTON HEAD BOLT
(M8x1.25x40mm)(64) and FLAT HEAD SCREWS(M6x1x12mm)(69).
STEP 12
Install four AA batteries into the COMPUTER(26). Four batteries are included. See page 17 for detailed
battery installation instructions. Plug the CONNECTION WIRE(25) into the EXTENSION WIRE on the
COMPUTER(26). Push the plugs and excess wires back into the UPRIGHT(3) and slide the COMPUTER(26)
onto the plate on the HANDLEBAR(4).
STEP 13
Attach the MOUNTING BRACKET(93) to the UPRIGHT(3) with ROUND HEAD SCREWS(M4x0.7x15mm)
(75). Place the WATER BOTTLE(94) in the MOUNTING BRACKET(93).