Sony Ericsson CDP-XE570 - Manual (Page 9)

9
CDP-XE570
4-3. ADJ MODE
The following operations are performed in the ADJ mode, which is
set by connecting the TP1 (ADJ) terminal to the Ground and turning
on the power.
Table of Button Operations in ADJ Mode
The functions of the buttons are shown in the following table.
Function of Buttons
* NOTE : Other buttons are not used for servicing and should not
be pressed without a reason.
Button
TIME/TEXT
M
m
CLEAR
Function
Tracking servo ON/OFF
OFFSET(VC)/EF.BIAS display
OFFSET(RF,FE,TRK) display
RFCK/GFS/ERROR RATE check mode
TP2
AFADJ
TP1
ADJ GND
S531
l AMS L
[ DISPLAY BOARD ] – Conductor side –