25 voice control, Voice control – Sony Ericsson Z525a User Manual
Page 26
This is the Internet version of the user's guide. © Print only for private use.
25
Calling
Voice control
With your phone, you can use your voice to:
• Voice dial – call someone by saying the name.
• Activate voice control by saying a “magic word”.
• Answer or reject calls when using a handsfree kit.
Voice commands can only be saved in the internal
phone memory, not on the SmartChip. When
recording, make sure that you are in a quiet
environment and try to use names that are distinct
from each other,
Before voice dialing
You must first activate the voice dialing function
and record your voice commands. An icon appears
next to a phone number that has a voice command.
Phone numbers must be in your contact list before
adding voice commands. An icon next to the contact
name indicates a voice command is associated with
that contact.
To activate voice dialing and
record names
1 }
Settings
}
the
General
tab
}
Voice Control
}
Voice Dialing
}
Activate
}
Yes
}
New Voice
and select a contact.
2
If the contact has more than one number, use
and
to view the numbers. Select the
phone number to which you want to add the
voice command. Now you are going to record
a voice command such as “John mobile” for the
phone number you selected.
3
Instructions appear. Wait for the tone and say
the command that you want to record. The
voice command is played back to you.
4
If the recording sounds ok
}
Yes
. If not
}
No
and repeat step 3.
5
To record another voice command for a contact
}
New Voice
}
Add
again and repeat steps 2-4
above.
Caller name
You can choose whether you want to hear the
recorded contact name when you receive a call
from that contact.