Sony Ericsson Z525a - Manual (Page 6)

This is the Internet version of the user's guide. © Print only for private use.
5
Getting started
SmartChip and battery
information
Always turn off the phone and detach the charger
before you insert or remove a SmartChip.
To insert SmartChip and battery
1 Remove the battery cover by sliding it as shown
in the picture.
2 Slide the SmartChip into its holder. Make sure
that the gold contacts of the SmartChip are
facing down, and the cut off corner is correctly
aligned.
3 Place the battery on the back of the phone with
the label side up and the connectors facing each
other.
4 Locate the notches along each side of the phone.
Using the notches as a guide, slide the back cover
upward until it clicks in place.
% 8 Replacing
Style-Up™ covers.