Philips 10002519 - Manual (Page 22)

22
SAFETY REGulATIONS - INSTAllATION
Fire safety
In case of fire, use carbon dioxide extinguishers (cO
2
).
do not use water or dry-powder extinguishers.
Key to machine components
coffee bean hopper
coffee bean hopper cover
Grinder adjustment knob
coffee dose adjustment knob
Main power button (ON/OFF)
Water tank cover
Water tank
Grounds drawer
Power cable
drip tray + grill
Height-adjustable dispensing spout
Steam/hot water spout with pannarello
Front door
Steam knob
coffee Brew Group
cleaning brush
Control panel
coffee dose per cup adjustment knob
coffee button
Temperature ready / coffee function light
Steam function button
Steam temperature light
Alarm light
Machine on light
4 inSTallaTion
For your own and for other people's safety, carefully
follow the "Safety regulations" in section 3.
4.1 packaging
The original packaging has been designed to protect
the machine during transport.
We recommend keeping the packaging for future
transport.
4.2 preliminary operations
• Remove the drip tray (10) with grill from the
packaging.
• Remove the coffee machine from the packaging
and position it in a proper place in compliance with
the requirements described in the safety regulations
(section 3).
• Insert the drip tray (10) into the appropriate seat.
Make sure that the drip tray, the grounds drawer
(8) and the coffee Brew Group (15) are correctly
placed and that the front door (13) is closed.
• Fit the cover of the coffee bean hopper (2) onto the
coffee bean hopper (1). Keep the cleaning brush
(16) to hand.
• Before plugging in the machine, make sure that the
main power button (5) is switched to -0-.
If the red light (22) flashes when the machine is turned
on, it means that one of the above mentioned parts is
not placed correctly.
important note: Carefully read the explanation
of all the warnings displayed by the machine
to the user by means of the lights on the control
panel (section 14).
4.3 Turning on the machine for the first
time
• (Fig. 25) - lift and extract the water tank (7) and
remove the cover (6). Rinse and fill it with fresh
water taking care not to overfill it. Reinsert the
water tank into the appropriate seat and replace
the cover (6) on top of it.