Siemens M101 User Manual
Page 34
Tips & tricks, settings
34
appendix.fm5
16.4.99
Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1
When "AVM/Eumex" is set, the special features of the AVM
proprietary (company-specific) protocol are taken into consider-
ation. In this case the speed settings are not compliant with AT
Hayes commands.
Support
Updates and news on the Internet
www.siemens.com/pc-communication-support
Notes on sending faxes directly from the PC
You may encounter problems if your PC program uses Class 1
fax mode. Class 1 does not support any delays in signal runt-
imes which are necessary for switching to radio mode.
Class 2 mode, on the other hand, is not as sensitive as Class 1.
However, interference can still occur due to a bad radio link. If
you have problems with this setting, start the configuration pro-
gram and check the transmission quality under Connection. This
can be changed by moving the Gigaset M101 Data unit slightly.