Sony MAV-555 - Manual (Page 16)

16 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option
18. FUNCTION TABLE
Function Key Press Description
GOTO ENTERED
TIME [SHIFT] + [RECUE] Search the VTR to the manually entered time.
Use the ST300 numeric keypad.
Press [ENTER] or [RECUE].
FFWD
[FFWD] Press and HOLD to shuttle. Release key to stop. Set WIND
Speed in MENU.
JOG [JOG] Select JOG mode and enable Wheel.
LAST CUE [LAST CUE] Step to the previous Cue Point Location.
NEXT CUE [NEXT CUE] Step to the next Cue Point Location.
RECORD [REC] Places VTR into the Record mode selected by RECORD
MODE in the SETUP MENU.
Press [RECORD] or [RECORD] + [PLAY].
REWIND
[RWD] Press and HOLD to shuttle. Release key to stop. Set WIND
Speed in MENU.
SHUTTLE [SHUTTLE] Select SHUTTLE mode and enable Wheel.
SLOMO
[SLOMO] Press [SLOMO] to slo-mo the VTR. Turn the Wheel (or move
the T-Bar if available) to change the play speed. Press
SLOMO] to STILL frame.
OR
Press any transport key to exit SLOMO.
SLO-MO SPEED
PRESET [SHIFT] + [SLOMO] For WHEEL ONLY: Press [SHIFT] + [SLOMO] to preset the
slo-mo speed. Turn the Wheel to select desired speed. Press
[ESC] or any transport key to exit.
STOP [STOP] Press once to STILL frame VTR.
Press again to put VTR into STOP mode.
GANG VTRs
[SHIFT] + [VTR #1]
OR
[SHIFT] + [VTR #2]
OR
[SHIFT] + [VTR #3]
OR
[SHIFT] + [VTR #4]
Press and Hold [SHIFT]. Then when lights go out, press VTR
keys to include in the gang. Press [SHIFT] to escape gang
setup mode. Flashing LED indicates VTR or HDD being
monitored for status.
TIME MODE
SELECT [TIME MODE] Press to toggle between Timecode (TC), VITC (VT) or Tape
Timer (TM) display modes.
LOOP CLIP [LOOP ENABLE] Press to loop a clip.