Specifications, Additional information – Sony TA-AV561A User Manual

Page 15

Advertising
background image

15

EN

Additional Information

Specifications

Amplifier section

Power output
Australian model:
(FRONT)
DIN power output

80 W + 80 W (at rear/

centre/woofer off at
1 kHz, 8 ohms)

Continuous RMS power output

110 W + 110 W (at rear/

centre/woofer off at
1 kHz, 10% T.H.D.,
8 ohms)

Music power output

160 W + 160 W (at rear/

centre/woofer off,
8 ohms)

(REAR)

20 W + 20 W (at front/

centre/woofer off at
1 kHz, 8 ohms)

(CENTER)

30 W (at front/rear/

woofer off at
1 kHz, 8 ohms)

(WOOFER)

40 W (at front/rear/centre

off at 40 Hz, 4 ohms)

Other Countries model:
Peak music power output

1800 W (total)

(FRONT)
Continuous RMS power output

100 W + 100 W (at rear/

centre/woofer off at
1 kHz, 5% T.H.D.,
8 ohms)

(REAR)

20 W + 20 W (at front/

centre/woofer off at
1 kHz, 8 ohms)

(CENTER)

35 W (at front/rear/

woofer off at 1 kHz,
6 ohms)

(WOOFER)

40 W (at front/rear/centre

off at 40 Hz, 4 ohms)

Outputs

TONE

TAPE REC OUT, VIDEO

1: Voltage 250 mV,
Impedance 1 kilohms

PHONES: Accepts low

and high impedance
headphones

±8 dB at 100 Hz and

10 kHz

Inputs

Sensitivity

2.5 mV

400 mV

250 mV

Impedance

50

kilohms

50

kilohms

PHONO

CD

TAPE, VIDEO
1, 2, TUNER

General

Power
requirements

Power
consumption

AC outlets

Dimensions

Mass (Approx.)

Supplied
accessories

110 - 120/220 - 240 V AC,

50/60 Hz

220 W

3 switched,

total 100 W max.

430 x 160 x 355 mm

9.3 kg

Remote controller

(remote) (1)

Size AA (R6) batteries (2)

Design and specifications are subject to
change without notice.

Advertising