Sony TA-AV561A - Manual (Page 9)

9 EN
Amplifier Operations
Recording
This amplifier makes it easy to record to and from the
components connected to the amplifier. You don’t
have to connect playback and recording components
directly: once you select a programme source on the
amplifier, you can record and edit as you normally
would using the controls on each component.
Before you begin, make sure you’ve connected all
components properly.
ç: Audio signal flow
Recording on an audio tape or video tape
You can record on a cassette tape or video tape using
the amplifier. See the instruction manual for the
cassette deck or VCR if you need help.
1
Press one of the function buttons to select the
component to be recorded.
2
Set the component to be ready for playing.
For example, insert a CD into the CD player.
3
Insert a blank tape into the recording deck and
adjust the recording level, if necessary.
4 Start recording on the recording deck and then
start playing the component.
Function buttons
ç
Playback component
(programme source)
ç
Recording component
(tape deck, VCR)