Stanton S-450 - Manual (Page 11)

turned off at this point, the loop will continue in regular
play. If the OUT/EXIT button is pressed during reverse
loop playback mode, playback will continue in reverse
until the reverse function.
22.Pitch Bend Hold
To lock the pitch bend at a specific parameter press the
HOLD button. This will engage the hold function which
will lock your desired pitch bend parameter and set a
new default value. Then you turn the wheel clockwise to
increase the pitch or counterclockwise to decrease the
pitch permanently. Also the default value set to pitch
value once when you moving the PITCH SLIDER.
23.Sleep Mode
The CD player automatically shuts off the transport and
laser after 15 minutes (when in pause or cue mode).
This will lengthen the life of your motor drive and laser.
To restart player, just press cue, PLAY/PAUSE buttons.