Stanton S-450 - Manual (Page 6)

decrease or increase when button is pressing and
returns to the original pitch when the button is
released.
25. BEAT SYNC-BUTTONS
Via the BEAT SYNC
buttons you can adjust the tempo(time) of the FX.
There are 6 Beat-Sync Parameter sets:
1/4,1/2,3/4,1/1,2/1 and 4/1.
26. JOG WHEEL This wheel has three functions:
1. The jog wheel will act as a frame search control
when the CD in the pause or cue mode, allowing you
to set a point.
2. The wheel also works as a pitch bend during
playback. Turning the wheel clockwise will increase
the pitch percentage up to 100%, and turning the
wheel in the counter-clockwise direction will decrease
the pitch percentage down to – 100%. The pitch bend
will be determined on how long you turn the jog wheel
continuously.
3. The jog wheel also controls the FX functions
including touch-sensitivity when in Scratch Mode (for
Vinyl like control)
27. CD LED
This LED is illuminated when the CD
tray is empty.
28. FX SEL. BUTTON
This arrow is used to select
the list/row of FXs to activate. Press the arrow button
to select the between SCRATCH/FILTER/ECHO/
TRANS and SKID/PHASE/FLANGER/PAN; to
activate press the FX SEL buttons. The LED above
the FX SEL. button will indicate which FX is currently
selected.
29. SCRATCH/SKID BUTTON
This button is used to
activate and deactivate the SCRATCH effect, when
the FX SEL.LED is green. This button is used to
activate and deactivate the SKID effect, when the FX
SEL. LED is blue. When SCRATCH or SKID effect is
activated, you can tune the TIME PARAMETER
button to adjust the start time and tune the RATIO
PARAMETER to adjust the stop time. If you want to
fine adjust the time parameters, you can press TIME
PARAMETER or RATIO PARAMETER button then
rotate the JOG wheel. Hold the button to active
scratch cue function and SCRATCH LED is red.
SCRATCH CUE
IN PLAYBACK MODE:
While in play mode and when the touch sensitivity
function is active, the JOG WHEEL can be used to
return the unit to last cue point. To activate this mode
press and hold the Scratch FX button. Once in scratch
cue mode simply touch the JOG WHEEL and unit will
immediately return to the last set cue point and
playback without music interruption.
IN CUE MODE:
While in cue mode and when the touch sensitivity
function is active, tapping on the JOG WHEEL can be
used to start playback. The unit will continue to
playback until the JOG WHEEL is released. One the
JOG WHEEL is released the unit will return to the last
point.
30. FILTER/PHASE BUTTON
This button is used to
activate and deactivate the FILTER effect, when the
FX SEL. LED is green. This button is used to activate
and deactivate the PHASE effect, when the FX SEL.
LED is blue. The TIME PARAMETER button is used
to adjust the FILTER/PHASE effect’s scan time in
mini-second. The RATIO PARAMETER button is
used adjust the FILTER/PHASE effect’s frequency
sweeping range.
31. HOLD BUTTON
This button allows you to set and
lock any new parameters you set to the FX. This
button will glow red when the hold function is
activated. If the hold function is not selected any
changes to the effect parameters will be momentary.
32. ECHO/FLANGER BUTTON – This button is used to
activate and deactivate the ECHO effect, when the
FX SEL. LED is green. This button is used to activate
and deactivate the FLANGER effect, when the FX
SEL. LED is blue. The TIME PARAMETER button is
used to adjust the ECHO/FLANGER effect’s scan
time in mini-second. The RATIO PARAMETER button
is used adjust the ECHO/FLANGER effect’s
frequency sweeping range.
33. TRANS/PAN BUTTON
This button is used to
activate and deactivate the TRANS effect, when the
FX SEL. LED is green. This button is used to activate
and deactivate the PAN effect, when the FX SEL.
LED is blue. The TIME PARAMETER button is used
to adjust the TRANS/PAN effect’s scan time in mini-
second. The RATIO PARAMETER button is used to
adjust the TRANS/PAN effect’s frequency sweeping
range.
34. REVERSE BUTTON This button activates
reverse play mode. This function will play your track
or sampler in reverse.
HOLD HOLD
ECHO ECHO
FLANGER FLANGER
REVERSE REVERSE
TRANS TRANS
PAN PAN
SCRATCH SCRATCH
SKID SKID PHASE PHASE
FILTER FILTER
FX SEL.
28 29 30 31 32 33 34