Sony KDS-R50XBR1 - Manual (Page 18)

Introducing the TV
18
KDS-R50XBR1/KDS-R60XBR1
2-637-151-11(1)
D:\WINNT\Profiles\fujii\Desktop\SX_EN_source
_onDT062305\01US03WEL.fm masterpage:3 columns Right
Rear Panel
RGB
PC IN 8
AUDIO
VHF/UHF
CABLE
1
9
5
4
3
AUDIO
OUT
(VAR/FIX)
VIDEO IN
1 3 4 5 IN OUT
CONTROL S HD/DVD IN
(1080i/720p/480p/480i)
IN
6 7
AUDIO IN
6
7
8
0
qa
qs
2
DIGITAL AUDIO
(OPTICAL)
OUT
PCM/DOLBY DIGITAL
S400
i.LINK
(DV/HDV/MICROMV/TV)
Jack Description
1 CABLE Connects to your cable signal. This CABLE input jack, in conjunction with the VHF/UHF
input jack, lets you set up your TV to switch between scrambled channels (coming through
a cable box) and unscrambled cable channels. For details, see page 25.
2 VHF/UHF Connects to your VHF/UHF antenna or cable box output jack.
3 CableCARD slot CableCARD provides cable subscribers with access to secure, digitally encrypted cable
channels — without the need for a set-top box — that will enable you to receive not only
standard definition but also high definition television. For details, see page 32.
4 VIDEO 8 (PC) IN Connect to the video output connector and audio output jack on your personal computer.
For details, see page 41.
5 HDMI
(VIDEO 6 IN and
VIDEO 7 IN) HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this TV and any HDMI-equipped audio/video component,
such as a set-top box, DVD player, and A/V receiver. HDMI supports enhanced, or high-
definition video, plus two-channel digital audio. You can also connect a DVI-equipped
device to your TV by using an HDMI-to-DVI cable.
6 S VIDEO Connects to the S VIDEO OUT jack of your VCR, camcorder, or other S VIDEO-
equipped video component. Provides better picture quality than the VHF/UHF jacks or the
VIDEO IN jack.
7 VIDEO/
L(MONO)-AUDIO-R Connects to the audio and video OUT jacks on your VCR or other video component. A
third video input (VIDEO 2) is located on the front panel of the TV.