Sony KDS-R50XBR1 - Manual (Page 99)

Using the Settings
99
Us
ing t
h
e Se
ttings
KDS-R50XBR1/KDS-R60XBR1
2-637-151-11(1)
D:\WINNT\Profiles\fujii\Desktop\SX_EN_source
_onDT062305\01US07MEN.fm masterpage:3 columns Right
Selecting PC Setup
Options To display the PC screen:
❑ See “Using the PC Input” on
page 60.
The PC Input Setup setting includes the following options:
z When there is no signal
input, settings for the
PC Setup options
except Power
Management cannot be
changed.
Option Description
Auto
Adjustment Select to automatically adjust the display position of the picture
when the TV receives an input signal from the connected PC.
Note that Auto Adjustment may not work well with certain
input signals. In such cases, manually adjust the options below.
Phase Select to adjust the phase when the screen flickers.
Pitch Select to adjust the pitch when the picture has unwanted
vertical stripes.
Horizontal
Center Select to adjust the horizontal position of the picture.
Allows you to move the picture left and right in the window.
Press B or b and press to choose a correction between +63 and -64.
Vertical Center Select to adjust the vertical position of the picture.
Allows you to move the picture up and down in the window.
Press B or b and press to choose a correction between +63 and -64.
Wide Mode Normal Select to display the picture in its original size.
Full 1 Select to enlarge the picture to fill the display area,
keeping its original horizontal-to-vertical ratio.
Full 2 Select to enlarge the picture to fill the display area.
✍
A black frame will appear on the surrounding of
the picture.
✍
When using SXGA signals and Wide Mode is set to
Normal, the top and bottom of the picture will be
cropped. When it is set to either Full 1 or Full 2 with
SXGA signals, the picture will appear in reduced size.
Power
Management On Select to automatically switch to the power
saving mode when there is no signal input for
10 minutes.
✍
POWER/STANDBY LED will light up in red when
your TV is in the power saving mode.
Off Select to turn off Power Management.
Reset Select to restore the factory default settings.
Auto Adjustment
Phase
Pitch
Horizontal Center
Vertical Center
Exit
Setup
Adjust PC setup options
Resolution − − − x − − − / − − Hz
MENU
(Continued)
z A warning message will
appear before switching
to the power saving
mode.