Smart Technologies SMART Document Camera 280 - Manual (Page 19)

99-00864-20 D0 Turning Off and Storing the Document Camera 11
Turning Off and Storing the Document Camera
This chapter explains the basic procedure for turning off the document camera and storing
it safely.
1. If the lamp is on, slide the illumination lamp switch to turn the lamp off.
2. Press the Camera button on the document camera control panel to display the
camera image.
3. Press the Power button on the document camera control panel for three seconds to
turn off the document camera.
1. Disconnect the cables from the rear panel.
2. Rotate the camera head as shown in the figure below.
CAUTION
Do not disconnect cables from the rear panel when the document camera is
turned on.
To turn off the document camera
CAUTION
Do not turn off the document camera until it displays the camera image.
To store the document camera
CAUTION
Do not apply excessive force to the camera head.