Smart Technologies SMART Document Camera 280 - Manual (Page 27)

99-00864-20 D0 Using the Document Camera 19
Displaying Image Data from an SD Memory Card
You can display image data from an SD (Secure Digital) memory card (not provided).
1. Set up the document camera (see page 7).
2. Press the Camera button on the document camera control panel to present the camera
image on the connected projector or television display.
3. Insert the memory card into the SD slot on the side panel.
CAUTION Avoid static electricity when handling SD memory cards. SD memory cards are
vulnerable to static electricity and exposure to static electricity can cause the
memory card to malfunction or corrupt its contents.
Do not insert an SDHC memory card. These memory cards are not compatible
with the document camera.
SMART Technologies assumes no liability for any damage caused by the loss
of data in the memory card or any passive damage.
TIP
For best results, use a Panasonic® 256MB or 512MB SD memory card.
To insert the SD memory card
CAUTION Do not insert a memory card into the document camera unless the
connected projector or television display shows the camera image.
Insert the memory card with the labeled side up. Do not force an
upside-down memory card into the slot.