Smart Technologies SMART Document Camera 280 - Manual (Page 22)

14 Using the Document Camera 99-00864-20 D0
Displaying Printed Materials
You can set up the document camera to display printed materials.
1. Set up the document camera and connect it to your computer (see page 7).
2. Place a document under the camera lens.
3. Rotate the zoom dial on the camera until the document image is at the
desired magnification.
OR
In SMART Notebook, press the plus or minus buttons to the right of the magnification
icon until the document image is at the desired magnification.
4. Press the AF button on the document camera to focus the image.
OR
In SMART Notebook, press the AF button in the SMART Document Camera window to
focus the image. You can also fine tune the focus with the plus or minus buttons to the
right of the focus icon .
5. Press the brightness buttons on the document camera control panel to adjust the
image brightness.
OR
In SMART Notebook, press the plus or minus buttons to the right of the brightness icon
to adjust the brightness.
To display printed materials