Game board – Sega Zombie Revenge User Manual
Page 33
30
12. GAME BOARD
In order to prevent an electrical shock, be sure to turn power off before
performing work by touching the interior parts of the product.
Be careful so as not to damage wirings. Damaged wiring can cause an
electric shock or short circuit accident.
Do not expose the Game BD, etc. without a good reason. In this product,
setting changes are made during the test mode. The Game BD need not be
operated. Use the Game BD, etc. as is with the same setting made at the
time of shipment.
12 -1
REMOVING THE GAME BOARD
To replace the IC Board or to change dip switch settings, take out the IC board using the following procedure;
1
2
3
Turn main switch off.
Unlock Cabi Drawer, pull outward, exposing all game components.
Disconnect all connectors connected to the Shield Case.
Take off the 4 screws to remove the Shield Case. The game board is inside the shield case.
4
NAOMI
GAME BD