Socket Mobile RT786 RT786EX - Manual (Page 38)

BIOS Setup
30
Advanced Menu
Phoenix BIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specific Help
Boot-time Diagnostic Screen:
[Enabled]
Summary Screen: [Disabled]
Legacy USB Support: [Enabled]
POST Memory Test: [Quick Test]
BootUp Display: [CRT+LCD]
I/O Device Configuration
Peripheral
Configuration for
COM port
Parallel port
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ← Select Menu Enter Select ► Sub-Menu F10 Save and Exit
Warning: Incorrect settings may cause system malfunction. To correct it,
restore the Setup Defaults with <F9>.
Advanced Menu Selections
It is usually not necessary for user to set up parameters here. Only technician may
need to change the settings for diagnostic purposes.
For most frequently altered setup “I/O Device Configuration” please refer following:
I/O Device Configuration Sub-menu
Phoenix BIOS Setup Utility
Advanced
I/O Device Configuration Item Specific Help
COM1 port:
[Enabled]
COM1 mode: [COM1]
Base I/O address/IRQ: [3F8/IRQ 4]
COM2 port: [Enabled]
COM2 Mode: [COM2]
IrDA Mode: [Disabled]
Base I/O address/IRQ: [2F8/IRQ 3]
COM3 port: [3E8/IRQ 10]
COM4 port: [2E8/IRQ 5]
Configure COM1 device
options
[COM1]: External device
[TTL1]: Internal device