Socket Mobile RT786 RT786EX - Manual (Page 45)

Utilities and Drivers
37
Touch Screen Driver
Enter BIOS Setup and set COM1 port as “TTL1”. (COM1 has multiple
connectivity so it’s necessary to setup. Optional COM4 may be configured as
touch screen and doesn’t need BIOS setup.)
Then cancel the prompt of installation wizard to setup the driver from the CD
(\RT786(EX)\Driver\Touchscreen) or install the drivers under Windows by Add
Hardware.
CD-ROM Driver
In Windows 98SE/2000/ME/XP, you don’t need to install drivers, because it is
included in the drivers list.
Only non-Windows OS need the driver
PCMCIA Driver
Windows 98SE/2000/ME/XP
The driver is automatically installed under Windows except Windows 98se.
Windows 98se will detect new PCMCIA cards so you must update the driver in
CD from Control panel\System\Device Manager\PCMCIA Socket\Generic
CardBus
Audio Driver
Windows 98SE/2000/ME/XP
Insert the Driver CD into the CD-ROM. Click Setup in RT786(EX) \Driver
\Audio \winxp2k98 then follow the prompt to complete installation.
LAN Card Driver
In Windows 98se/2000/ME/XP click System → Hardware → Device Manager
→
choose Network adapters, then choose the appropriate device and click
Driver → Update Driver. Follow the prompt to complete installation.
Fax/Modem Card Driver
Windows will detect new Fax/Modem cards so you must update the driver in CD
from Control panel\System\Device Manager\Other device\PCI Card