Socket Mobile RT786 RT786EX - Manual (Page 39)

BIOS Setup
31
Parallel Port: [Enabled]
Mode: [Output Only]
Base I/O address: [378]
Interrupt [IRQ 7]
F1 Help
↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ← Select Menu Enter Select ► Sub-Menu F10 Save and Exit
I/O Device Configuration Sub-menu Selections
Please refer the on screen help for selections. BIOS shows COM3, COM4 but they
are optional devices. Only when COM3/4 card is installed the function exists.
Security Menu
Warning: If you forget user/supervisor password, the computer has to send
back to manufacturer and replace EEPROM to make it work again.
For loss of HDD password, both the HDD and its contents cannot be
recovered.
Phoenix BIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specific Help
Set Supervisor Password:
[Enter]
Set User Password: [Enter]
Password on boot:
[Disabled]
Fixed disk boot sector: [Normal]
Diskette access: [Normal]
Set Primary Disk Password:
[Enter]
Primary Master Disk Status [HDD Paswrd Clean]
Supervisor password
controls access to the
setup utility.
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ← Select Menu Enter Select ► Sub-Menu F10 Save and Exit