Scientific Atlanta 3270HD - Manual (Page 12)

12
Bac Bac Bac Bac Back P k P k P k P k Panel Connector anel Connector anel Connector anel Connector anel Connectorsssss
1 Connect to a 1394-equipped HDTV or
consumer peripheral. Contact your
cable service provider to determine if
this port is supported in your area.
2 Record your serial number and MAC
address shown from this label on
page 7 of this guide for future
reference.
3 Connect an optical cable to send a
digital audio signal to a surround-
sound receiver or other digital audio
device.
4 Connect to the DVI input port on your
HDTV. Contact your cable service
provider to determine if this port is
supported in your area.
5 Attach the IR Blaster cable to use
with the optional VCR Commander™
Service. See Setting Up the VCR
Commander Service on page 37.
6 Connect an S-Video cable to send an
S-Video signal to your TV or VCR.
This signal is SDTV but higher-
quality than other SDTV connections.
7 Connect the HDTV (Y, Pb, and Pr)
component output ports to the HDTV
input on your HDTV. You must use
these ports to provide HDTV signals
to your HDTV.
8 Connect an RCA cable to send a
digital audio signal to a surround-
sound receiver or other digital audio
device.
9 Connect an RCA cable to Video Out
and Left/Right Audio Out to send
analog video and audio signals to a
standard TV or VCR. This signal is
SDTV.
10 Connect a coaxial cable to Cable Out
to send analog audio and video signals
to a TV or VCR. These signals are
SDTV video with mono audio.
11 Connect RCA cables to Audio Out to
send analog audio signals (left and
right) to a stereo receiver or a TV with
stereo inputs.
12 Connect the coaxial cable that delivers
the signal from your cable service
provider.
13 Connect an optional RF Bypass
module to your set-top. This module
allows you to view one channel while
recording another. Contact your cable
service provider to see if this service
is available.
14 Connect the power cord for another
device to deliver power to that device.
15 Connect the power cord provided to
deliver power to the set-top.
THIS DEVICE IS INTENDED TO BE ATTACHED
TO A RECEIVER THAT IS NOT USED TO
RECEIVE OVER-THE-AIR BROADCAST
SIGNALS. CONNECTION OF THIS DEVICE
IN ANY OTHER FASHION MAY CAUSE
HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS AND IS IN VIOLATION
OF THE FCC RULES, PART 15.
S-VIDEO
OUT
AVIS: RISQUE DE CHOC
ELECTRIQUE NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CABLE IN
BYPASS
CABLE
OUT
IR
DVI 1394 1394
AUDIO OUT
R
L Pr
Pb
Y 120 VAC
60HZ 400W
120 VAC
60HZ 400W
VIDEO
OUT
DIGITAL
AUDIO
OUT
AUDIO
OUT
OPTICAL
HDTV
0003B4287797
SABDQXTL N0006246618
T10833
6 4 7 1 13 12 2 8 9 5 3 10 11 15 14