Schutt Sports C2000 - Manual (Page 16)

C1000 & C2000 Assembly Instructions
16 www.schuttsports.com 800-426-9784
Backboard, Rim, and Extension Post Assembly (continued)
Step 4: Position extension post (1)
against backboard (2) rear and rim (3)
against backboard front with slots in all
parts aligned.
Step 5: Assemble with four 3/8" x 1"
bolts (4), eight washers, and four
nylock nuts. Verify that extension post,
backboard, and rim are square with
each other. Snug tighten nuts.
Hardware sequence: Bolt passes
through •washer •rim •backboard
•extension post plate •washer and •nut.
Step 6: Loosely attach backboard braces
(5) to extension post using 3/8" x 3" bolt
(6), two washers, and nylock nut.
Hardware sequence: Bolt passes
through •washer •brace •extension
post •brace •washer and •nut.
Step 7: Attach backboard braces to
backboard frame using 5/16" x 1" bolts
(7), washers, and nylock nuts. Snug
tighten nuts.
Hardware sequence: Bolt passes
through •frame •brace •washer and •nut.
1
2
6
4
3
5
7