Schutt Sports C2000 User Manual
Page 5
C1000 & C2000 Assembly Instructions
5
www.schuttsports.com
800-426-9784
S
A F E T Y
I
N S T R U C T I O N S
Before operating or assembling / disassembling
or providing maintenance on this product, read all
safety precautions and warnings as found in the
Installation and Owner’s Instructions. Failure to
follow all instructions may result in serious injury
or death and/or property damage.
•
Do not install or use this product unless the instructions within this manual have been carefully
read and understood.
•
Consult your Schutt Sports dealer or Schutt Manufacturing, Co. if you do not understand the
instructions in this manual or need additional information.
Proper Set Up and Use
•
Adult supervision is required for young children.
•
Never hang on, climb on, or stand on this equipment.
•
DANGER! METAL CONDUCTS ELECTRICITY! Do not use or locate this product in a location
where contact with electrical wires is possible.
•
Do not locate this product on a surface that is not level, or a surface that is not intended to
support this product.
•
Make sure all adjustable parts are locked in place before using this product.
•
Low backboards increase the chances of player contact with the backboard or rim. Use
caution. Backboard padding is an option.
•
Low rims can increase the chances of player entanglement in the net. Use caution. Consult
the manufacturer for additional safety equipment. Never move portable goals unless rim /
backboard is lowered to a safe elevation.
•
Consult additional safety precautions found in the operation and assembly instructions for this
specific product.
•
Do not use this equipment in violation of basketball rules. Do not use this equipment for
another sport or purpose.
Inspection of Equipment
•
Inspect for damage or missing parts including loose nuts or other retaining devices.
•
Do not use his product if it has damaged or missing parts.
•
Ocasionally, lightly lubricate moving parts to prevent unnecessary wear.
•
Check product for excessive wear or corrosion. Do not use if either of these conditions exist.
•
Never repair a damaged part without permission form the manufacturer.
•
If the product fails to function properly, discontinue use and notify the manufacturer. Do not
attempt to repair or replace or make adjustments on inspected parts without first consulting
the manufacturer.