SIGMA BENEFON TDP-52-SN3 - Manual (Page 33)

27.1.1999
3DP_52GB 7
Product: TDP-52-SN3 /
Tunings
From Tunings main menu you can select different tunings to do. Every tuning have
they own instruction window. Follow given instructions to do tunings. Clicking
START will start tuning. The value will be stored only by clicking SAVE. Some of the
tunings are chained and you can enter to next phase by clicking NEXT.
System
You select used mobile phone system from this submenu.
File
From settings submenu you can manually change settings of the communication
port.
4.3 WinFlash
4.3.1 To start WinFlash
Connect the LocalBox to serial port of your computer, which is called COM1 or
COM2. The serial ports are usually located in the back of your computer, and more
precise instructions can be found in the manual accompanying the computer.
It is recommended to use external power supply when transferring software to
phone with WinFlash. If it is impossible to use external power supply the battery of
phone must be fully charged.
NOTE !
Before starting WinFlash save the short code memory places and settings of the
phone to disc. You can use Benewin or Beneserv to save the SCM and settings.
Switch off the phone. Plug the cable with flat connector into the connector at the bot-
tom of the phone. Start WinFlash by double clicking WinFlash icon. After opening
the main window of the WinFlash select the correct communication port.