SIGMA BENEFON TDP-52-SN3 - Manual (Page 26)

27.1.1999
6DP_52GB 11
Product: TDP-52-SN3 /
3.3.3 HF-function tuning in practice
You can tune HF-functions two ways: manually or with car kit.
Manual tuning
1. Connect the localbox to your phone, and turn the phone on.
2. Press and the following text will appear in the display: ***BENEFON***.
*
will be flashing in the display.
3. Press , and the following text will appear in the display:
HF-FUNCTION
4. Choose SELECT, and the following text will appear in the display:
CAR KIT TUNING [038]. (The figure can be different).
5. Choose CHANGE, and the following text will appear in the display:
CAR KIT TUNING [ ] (026). (The figure can be different).
6. Enter three digits and SAVE. Yhe recommended value is between 033
and 043.
7. Choose SELECT, and the following text will appear in the display:
CAR KIT SWING (1...4): [3]. (The figure can be different).
8. Choose SELECT, and the following text will appear in the display:
CAR KIT SWING (1...4): [3]. (3 is blinking)
9. Enter one digit and OK.
Tuning in car kit
1. Connect the localbox to your phone, and turn the phone on.
2. Press and the following text will appear in the display: ***BENEFON***.
*
will be flashing in the display.
3. Connect the hand portable to the car kit
4. Press , and the following text will appear in the display:
HF-FUNCTION
5. Choose SELECT, and the following text will appear in the display:
CAR KIT TUNING [038]. (The figure can be different).
6. Choose CHANGE, and the following text will appear in the display:
CAR KIT TUNING [ ] (026). (The figure can be different).
7. Drive the car so that you can get a normal back ground noise level. The
figure (026) will be changed according the back ground noice level.
8. Enter three digits (back by pressing

) shown in the figure (xxx) and
SAVE. The level will be stored.