SIGMA BENEFON TDP-52-SN3 - Manual (Page 29)

27.1.1999
3DP_52GB 3
Product: TDP-52-SN3 /
4.1.2 To start the BeneWin program
Connect your phone with a cable to the serial port of your computer, which is called
COM1 or COM2. The serial ports are located in the back of your computer, and more
precise instructions can be found in the manual accompanying the computer. Plug
the flat end of the cable into the connector at the bottom of your phone. When the
cable has been connected and the phone is functioning, you can start the BeneWin
Program.
To start the BeneWin Program, double-click the BeneSCM icon.
If the phone has not been connected to the computer and you start the Program, the
following error message will appear on the screen: FATAL COMMUNICATION
ERROR. You will, however, be able to modify the data stored in your computer’s
memory locations by clicking the OK button.
If you use a laptop computer make sure that the computer is not in the energy saving
mode. If so the energy saving mode may prevent the transfer of data from the
phone to computer or vice versa.
After starting up the BeneWin program will guide you further with the help of an elec-
tric manual (Online Help).