Sony PAL NTSC 4.43 SLV-SE80UX - Manual (Page 42)

Basic Operations
42
Recording TV programmes using the ShowView system
(continued)
1 2 3
4 5 6
7 8 9
0
CLEAR
MENU EXIT :
– 1 2 4 6 – – – –
TUE 2 8 . 9
VIDEO PLUS+
PLUS CODE
SET : 0–9
CANCEL : CLEAR
CONFIRM OK :
2
Press the programme number buttons to
enter the Plus Code.
If you make a mistake, press CLEAR and
re-enter the correct number.
3
Press OK.
The date, start and stop times,
programme position, tape speed, and
VPS/PDC setting appear on the TV
screen.
• If “--” appears in the “PROG.”
(programme) column (this may
happen for local broadcasts), you have to set the appropriate
programme position manually.
Press >/. to select the desired programme position.
To record from another source connected to the LINE-1 (TV)
connector, the LINE-2 IN jacks, or the LINE-3 IN (Scart) connector,
press INPUT SELECT to display “L1,” “L2,” or “L3.”
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
4
If you want to change the date, tape
speed, and the VPS/PDC function
setting:
1 Press ?// to highlight the item
you want to change.
2 Press >/. to reset it.
• To record the same programme every
day or the same day every week, see “Daily/weekly recording”
on page 43.
• To use the VPS/PDC function, set VPS/PDC to ON.
For details of the VPS/PDC function, see “Timer recording with
VPS/PDC signals” on page 43.
OK
PLAY
CLEAR
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENU EXIT :
TIMER
SP / LP
LIST
TIME PROG.
TODAY 5 1 9 : 0 0 2 0 : 0 0 3
SP VPS / PDC OFF
TUE 2 8 . 9
OK
PLAY DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENU EXIT :
TIMER
SP / LP
LIST
TIME PROG.
TODAY 5 1 9 : 0 0 2 0 : 0 0 3
SP VPS / PDC OFF
TUE 2 8 . 9