Schneider Optics Web Embedded Server - Manual (Page 21)

Introduction
840 USE 115 00 Version 1.0 11
1.3 Utility Diskette
Included with this manual is a diskette containing two utilities for the Ethernet
module: the Network Options Ethernet Tester utility and the ERRLOG utility.
1.3.1 Network Options Ethernet Tester
This utility will allow you to:
z establish a connection
z get and clear statistics
z
read and write registers
The Network Options Ethernet Tester communicates with the module over the
Ethernet, from an IBM-compatible PC operating with Windows 3.1 or greater and
with WinSock.
Instructions for using the Network Options Ethernet Tester are given in Chapter 6
on page 73.
The source code for the Network Options Ethernet Tester is included on the
diskette.
1.3.2 ERRLOG
This utility allows you to read and clear the crash log from an IBM-compatible PC
communicating with the local Quantum controller via Modbus Plus.
The PC must be equipped with an SA85 Modbus Plus card and software driver.
ERRLOG may be run in a native DOS environment or in a DOS box under
Windows 3.1 or Windows 95.
Instructions for using ERRLOG to read and clear the crash log are given in section
7.1.9 on page 85.