Schneider Optics Web Embedded Server - Manual (Page 5)

840 USE 115 00 Version 1.0 iii
Preface
The data and illustrations found in this book are not binding. We reserve the right to
modify our products in line with our policy of continuous product development. The
information in this document is subject to change without notice and should not be
construed as a commitment by Schneider Automation, Inc.
Schneider Automation assumes no responsibility for any errors that may appear in
this document. If you have any suggestions for improvements or amendments or
have found errors in this publication, please notify us.
No part of this document may be reproduced in any form or by any means,
electronic or mechanical, including photocopying, without express permission of
the Publisher, Schneider Automation, Inc.
MODSOFT® is a registered trademark of Schneider Automation, Inc. The following
are trademarks of Schneider Automation, Inc:
Modbus Modbus Plus Modicon 984 Quantum
Microsoft®, MS-DOS® and Windows® are registered trademarks of Microsoft
Corp.
IBM® and IBM AT® are registered trademarks of International Business Machines
Corp.
©Copyright 1998, Schneider automation, Inc. Printed in U.S.A.
CAUTION
All pertinent state, regional, and local safety regulations must be observed
when installing and using this product. For reasons of safety and to assure
compliance with documented system data, repairs to components should
be performed only by the manufacturer.
Failure to observe this precaution can result in injury or equipment damage.