Schneider Optics Web Embedded Server - Manual (Page 57)

Using the Network Options Ethernet Tester
840 USE 115 00 Version 1.0 47
Type the module’s IP network address or host name in the box provided. Click the
OK button. This dedicates a connection from your PC to the designated Ethernet
module and brings you to the main menu.
To activate the connection, select Management and choose Connect from the
pulldown menu or click on the connect button in the toolbar.
When you are ready to disconnect, select Management and choose Disconnect
from the pulldown menu or click on the disconnect button in the toolbar.
You may establish several connections with the same module or with other
modules by selecting New from the File pulldown menu or by clicking on the create
new connection button in the toolbar. Each connection has its own window within
the main window. The Window pulldown menu gives you options for arranging
connection windows and allows you to select one. The options available on the
pulldown menus and toolbar in the main window apply to the selected connection.
After disconnecting from one module, you may reassign its dedicated connection
by selecting Management and choosing Set IP Address from the pulldown menu.
Type the new IP network address or host name in the box provided.
Figure 20 Main Menu
(module address)
(module address)
(module address)