Schneider Optics Web Embedded Server - Manual (Page 42)

The MSTR Instruction
32 840 USE 115 00 Version 1.0
3.2.5 Get Local Statistics MSTR Operation
The Get Local Statistics operation (type 3 in the display register of the top node)
obtains information related to the local node where the MSTR has been
programmed. (See page page 40 for a listing of the TCP/IP Ethernet network
statistics).
Control Block
Utilization The registers in the MSTR control block (the top node) contain the Get Local
Statistics information as described in the following table:
Register Function Content
Second implied Length Write = number of registers to be sent to slave.
Read = number of registers to be read from slave.
Third implied Slave device data
area Specifies starting 4x register in the slave to be
read from or written to (1 = 4001, 49 =40049).
Fourth implied Low byte Quantum backplane slot address of the NOE
module.
Fifth ... eighth
implied Destination Each register contains one byte of the 32-bit IP
address.
Register Function Content
Displayed Operation Type 3
First implied Error status Displays a hex value indicating an MSTR error,
when relevant.
Second implied Length Starting from offset, the number of words of
statistics from the local processor’s statistics
table; the length must be > 0 < data area.
Third implied Offset An offset value relative to the first available word
in the local processor’s statistics table. If the
offset is specified as 1, the function obtains
statistics starting with the second word in the
table.
Fourth implied Low byte Quantum backplane slot address of the NOE
module.
Fifth .. Eighth
implied Not applicable