Schneider Optics Web Embedded Server - Manual (Page 56)

Using the Network Options Ethernet Tester
46 840 USE 115 00 Version 1.0
5.2 Installing the Network Options Ethernet Tester
Insert the utility diskette in your disk drive. Run A:\Setup.exe.
5.3 Establishing a Connection with an Ethernet
Module
To establish a connection with an Ethernet module using the Network Options
Ethernet Tester, you must know the module’s IP network address or host name.
From the initial menu, select File and choose New from the options in the pulldown
menu or click on the new connection button in the toolbar.
Figure 19 Initial Menu
Create new connection
Connect
Disconnect
Read register
Write register
Get statistics
Clear statistics