Sony SS2624 - Manual (Page 10)

7
Chapter 2
Installation
This Chapter covers the physical installation of the SpeedStream Wireless
DSL/Cable Router.
Requirements
• DSL or Cable modem, and an Internet Access account with an ISP, for shared Internet
access.
• Network cables. Use standard 10/100BaseT CAT5 network (UTP) cables with RJ45
connectors
• TCP/IP network protocol must be installed on all PCs.
• For shared access to the attached printer, the following clients are supported:
• Windows 95/98/ME
• Windows NT 4.0, 2000 or XP
• Unix (LPD printing)
Procedure
Figure 3: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the DSL/Cable Router.
Ensure both the DSL/Cable Router and the DSL or Cable modem are powered OFF.
2. Connect LAN Cables
• Use standard 10/100 CAT5 network cables to connect PCs to the Switching Hub ports on
the DSL/Cable Router.
• Both 10BaseT and 100BaseT connections can be used simultaneously.
2