Printer port – Sony SS2624 User Manual
Page 77
DSL/Cable Router User Guide
74
Printer Port
Printer Port configuration is only required if using LPD printing under Linux or Unix. Other-
wise, these settings are ignored.
Under LPD, the DSL/Cable Router supports 3 "Logical Printers".
Figure 43: Printer Port Screen
Logical Printers
No (L1, L2, L3)
There are 3 Logical Printers (Ports), named L1, L2, and L3.
These names can not be changed, and must be used when select-
ing the logical printer from your Unix system.
Pre-string (HEX)
Enter (in HEX) the series of printer commands to be sent to the
attached printer BEFORE each print job.
Post-string (HEX)
Enter (in HEX) the series of printer commands to be sent to the
attached printer AFTER each print job.
LF to CR/LF
If checked, Unix-style LF (line feed) characters at the end of each
line will be converted to CR/LF (carriage return/line feed) pairs,
as used in MSDOS and Windows.