Sanyo DSR-3016 - Manual (Page 47)

INITIAL SET MENU
EXT. CLOCK SET setting
(default setting: 01:00)
If more than two devices are connected at the same time, the time
settings (ADJUST TIME) for the digital video recorder are also applied
to these devices.
1
Connect the other devices to the input terminal (CLOCK
ADJUST IN) and output terminal (CLOCK ADJUST OUT) at the
rear of the digital video recorder.
2
Turn the jog dial to move the cursor to the ADJUST TIME
setting in the EXT. CLOCK SET menu, and then turn the
shuttle dial clockwise.
“01” flashes.
3
Turn the jog dial to set the hours (example: “ 05” ), and then
turn the shuttle dial clockwise.
4
Press the EXIT/OSD button.
The display returns to the normal screen.
B TIMER settings
(default setting: 00:00)
The timer function uses two separate timer settings (TIME PERIOD A
and TIME PERIOD B), and each timer setting can be made in four
time zones (example: midnight, morning, daytime, night).
For example, TIME PERIOD A time zones can be set for automatic
screen switching and TIME PERIOD B time zones can be set for gray
pattern cover on camera images.
<LANGUAGE/LANGUE/IDIOMA>
ENGLISH
<CLOCK SET>
01-01-2002 TUE 00:00:00
<DAYLIGHT SAVING>
MODE : USE
WEEK MONTH TIME
ON 1ST-SUN 04 02:00
OFF LST-SUN 10 02:00
<EXT.CLOCK SET>
ADJUST.TIME 01:00
ALARM FULL
C R1 R2 C
FULL
WARNING OUT NON REC OUT ALARM RESET
ALARM OUT
CLOCK SET OUT
REMOTE
Other peripheral equipment
(such as DRS-3000)
CLOCK SET IN
<EXT.CLOCK SET>
ADJUST.TIME 05:00
EXIT/OSD
Morning
Daytime
Night
Timer 1
Timer 2 Timer 3
Timer 4
11:00 – 13:00 13:00 – 18:00
18:00 – 6:00
Images from cameras
4, 6, 9, 12 and 16 are
switched automatically
Images from cameras
7, 11, 12 and 13 are
switched automatically Images from cameras
8, 9, 10 and 16 are
switched automatically
6:00 – 11:00
Images from cameras
1, 3, 5 and 6 are
switched automatically
46 English