Samsung SF-5800 - Manual (Page 23)

1.14
Set Up Your Machine
Using the Manual Feeder
Use the front manual feeder in order to feed paper one sheet at a time
into your machine.
Note: When you print a file from PC, make sure that you select the manual
feeding source and the correct paper size from your software application
before starting your print job. (SF-5800P Only)
1. Place the paper in the manual feeder and adjust the paper guides
to the width of the print material.
Refer to the instructions to load each type of material on page 1.13.
2. Make sure that the paper is as far down as it will go.
3. Press Start to start manual feeding. If you have more than one page
to print, press Start for each page.
Manual paper feeder