Samsung SF-5800 - Manual (Page 45)

2.13
Sending a Fax
2
Operation
4. The display asks you to enter another fax number to send the
document to another location.
Note: The machine displays the ÔANOTHER FAX NUMBER?Õ message
repeatedly, each time you enter a fax number using manual dialing, One-
Touch, 2-digit Speed Dialing, or Group Dialing. If you already used a
group number at step 3, you cannot use another group number any more.
You can use only one group number at this transmission job.
If you have used this multi-address transmission feature in other
operation(s) currently registered in memory, the machine does not display
ÔANOTHER FAX NUMBER?Õ.
5. If you want to send to more than one location, press Enter and enter
another fax number using the number keypad, one-touch dial, or 2-
digit speed dial number.
Note that you cannot use Group dial number
for another fax number.
The number appears in the display. Press Enter to confirm the number.
Or
To send to one location or when you complete the last fax number
setting, press
Stop .
6. The display asks you to enter a name. If you want to assign a name to
the transmission, enter the name. If not, skip over this step.
For details on how to enter letters using the number keypad, see page 2.4.
7. Press Enter . The display shows the current time on the upper line and
asks you to enter the time in the bottom line when the fax is to be sent.
8. Enter the time by using the number keypad, then press Enter .
Enter the time in 24-hour format or 12-hour format. For example, enter
2230 for 10:30 P.M. If you set a time earlier than the current time, the
document will be sent at that time on the following day.
9. The machine returns to Standby mode and the display shows a
reminder that a Delayed Transmission is set.
Note: If you want to cancel the Delayed Transmission, see ÔCanceling a Standby
OperationÕ on page 2.16.
ANOTHER
FAX NUMBER ?
CURRENT [12:30]
START [12:30]