Samsung SF-5800 - Manual (Page 38)

2.6
Entering Numbers
You can enter the number of the remote fax machine manually by using
the number keypad. The number you pressed appears in the display.
When the display asks you to enter a number, you can also use a one-
touch dial button (including Group dial) and 2-digit speed dial number.
Your machine lets you send the same document to more than one
location. When you enter a fax number, if the display reads ÔANOTHER
FAX NUMBER?Õ you are allowed to enter another fax number. To enter
ANOTHER FAX NUMBER, you can enter the number manually, or use
one-touch or 2-digit speed dial number. Note that you can not use
Group dial button for ANOTHER FAX NUMBER.
Editing Numbers or Name
If you make a mistake while entering a number or name, move the
cursor under the wrong digit by using
¨ or Ã. Then press the correct
number to change, or press Delete to delete the number.
Inserting Pause
With some private telephone systems, you must dial an access code (9,
for example) and listen for a second dial tone before dialing an outside
number. In such cases, you must insert a pause in the number. Insert a
pause in a number when you are setting up a one-touch or speed dial
number, or when you dial a number without lifting the handset.
To insert a pause, press Pause while entering the number.
When you dial a number, the dialing process pauses for about 3~4
seconds at the point where you pressed
Pause .
If you require a longer pause time, press Pause twice.
TEL)95551212_