Operation of remote control (continued) – Sharp 20F630 L User Manual
Page 50
50
Dimension: 140mm x 215mm
Operation of Remote Control (Continued)
3
2
1
6
5
4
9
8
7
100
0
TV • CATV • VCR • DVD
A
B
C
D
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
REC
PLAY
:
L
STOP
FWD
)
REW
(
PAUSE
J
POWER
DISPLAY
INPUT
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU
MUTE
g
SKIP
f
CATV
TV
DVD
VCR
L HOW TO IDENTIFY A DVD
The remote control may already be set to
operate your DVD. Try this initial check before
going on to the following “identify” section.
(1) Press
CATV/DVD button.
(2) Point remote towards DVD and press
POWER
(DVD/VCR).
(3) Does the remote turn the DVD ON and OFF?
• If yes, the remote is ready to operate the DVD
and no further steps are needed.
• If no, continue to the “identify” section.
L To identify your DVD – Direct Entry Method.
Use the following steps and list to quickly find
the remote control code for your accessory
DVD.
• First look up your DVD’s remote control code
number before going through the direct code
entry steps control.
(1) Press
CATV/DVD button.
(2) Press and hold down
INPUT and CH DOWN
(9) on your remote control.
Then release both buttons.
(3) Within ten seconds after releasing
INPUT and
CH DOWN (9) , enter your DVDs two-digit
remote control code number using
REMOTE
KEYPAD (refer to list).
• The remote control is now ready to send
commands to your DVD.
DVD BRAND
REMOTE CONTROL
CODE NUMBER
Denon
02
JVC
09
Magnavox
04
Marantz
04
Mitsubishi
06
Panasonic
02
Philips
04
Pioneer
08
Proscan
03
RCA
03
Samsung
07
Sharp
01, 10
Sony
05
Toshiba
04
Yamaha
02
Zenith
04
Note:
Depending on the model, year produced, brand,
and type of DVD, some models may not be
compatible with the remote control.
TV POWER
REMOTE
KEYPAD
POWER
(DVD/VCR)
CATV/DVD-TV/VCR
DISPLAY
CHANNEL UP (,)/
DOWN(9)
INPUT
20F630[46-50].p65
25/3/03, 3:04 PM
50