Sunwave Tech. SRC-2200 - Manual (Page 25)

Steps include:
1. Select L. Macro 01 under TV as the designated Learning Macro key.
2. Enter every original remote control code one by one
Step 1:
Go to the “Remote Setup” menu, select
Macro/Timer, then select Learning
Macro.
Step 2:
Select TV device.
Step 3:
Assign “L. Macro 01” as the Learning
Macro key.
Note:
z Only Soft key can be assigned as a Learning Macro key
z We suggest you create a new key as a Learning Macro key.
Ex. L. Macro 01.
z You are able to add keys by using the RemoteComm software.
Step 4:
Keep 5-10cm distance away between
the original remote control and
SRC-2200 and put them in a direct line.
During learning, hold and press every
learned key of the original remote to
24