Sunwave Tech. SRC-2200 - Manual (Page 27)

Step 1:
After saving the settings in a
macro, a prompt for timer setting
will be displayed. Select Yes to
enter, then input the time.
Press NEXT to enter the next
step.
Step 2:
If select Specific Date, then
press next to set an exact date.
Otherwise select specified
weekday(s).
Note: This Macro will not have a
timer function if you select OFF.
Step 3:
After setting a specific date,
press Done to save the setting .
OR
After setting specified
weekday(s), press Next to save
the setting.
OR
Select Off, press Next to save
the setting.
26