Sunwave Tech. SRC-2200 - Manual (Page 28)

Macros and Timers have the following three types of status:
• Macro is set, but timer is not.
• Macro is set, and timer is activated.
• Macro is set, but timer is NOT activated.
2. Add a Timer after the Macro is set.
Go to Macro/Timer, then select Set Timer.
Path: REMOTE SETUP
Æ Macro/Timer Æ Set Timer.
Select the Macro that requires a Timer, and set it according to the above steps.
: indicates a Macro is already set up.
: indicates a Timer is already activated.
3. Turn off the timer after the timer is set. Select the Macro which will not need a
Timer.
4. Select Off on the top to disable the Timer function. Press Next to save setting
press Back to return to the Set timer page.
27