Sega WORLD SERIES '99 - Manual (Page 12)

9
3 - 4 INPUT TEST
This test displays the state of each switch.
If this switch goes ON when activated, it is satisfactory.
Display varies depending on the JOYSTICK TYPE setting in (3) GAME ASSIGNMENTS.
The XX value of 1P (2P)_STICK (XX,YY), indicates the
middle value when the STICK is untouched. It indicates
the minimum value when the stick is turned to the right,
and the maximum value when the STICK is turned to the
left. The volume setting is normal if the maximum value
is between 70 and 8F, the minimum value is between 00
and 0F, and the maximum between F0 and FF.
The YY value of 1P (2P)_STICK (XX,YY) indicates the
middle vlaue when the STICK is untouched. It indicates
the minimum value when the STICK is turned down, and
the maximum value when the STICK is turned up. The
volume setting is normal when the middle value is
between 70 and 8F, the minimum value is between 00
and 0F, and the maximum value is between F0 and FF.
3 - 5 SOUND TEST
This allows sound and background used in the game to be checked/ tested.
To check them, specify the appropriate item using the
SERVICE Button and press the TEST Button to generate
the sound.
By default, the arrow is located at EXIT.
INPUT TEST
1P_START :OFF 2P_START :OFF
1P_ABUTTON :OFF 2P_ABUTTON :OFF
1P_BBUTTON :OFF 2P_BBUTTON :OFF
1P_STICK: (80, 80) 2P_STICK: (80,80)
1P_BAT : 80 2P_BAT : 80
PRESS TEST BUTTON TO EXIT
SOUND TEST
PACKAGE01
PACKAGE02
BGM_PACK
AMBIENCE
UMPIRE
SYSTEM
TEAMCALL
SELECT WITH SERVICE BUTTON
PRESS TEST BUTTON TO EXIT
The value of 1P (2P)_BAT indicates the minimum value when the BAT is untouched (face up) position. It indicates the
maximum value when the BAT is rotated about half a turn until it is stopped. The volume setting is normal if the
minimum value is between 00 and 0F and the maximum value is between F0 and FF.
If any value is abnormal, return to the menu screen and take steps described in #4 “VOLUME SETTING”. Then return
to this test and confirm the values.
To return to the menu screen, press the TEST Button while holding the SERVICE Button down.